





Stainless Steel Meter Box
Stainless Steel Meter Box
Factory-built stainless steel meter boxes made to customer drawings, with no fixed catalog size range. Upon confirmation of drawings and project specifications, wall-mounted meter boxes, floor-standing meter boxes, and junction boxes are produced.
Material: Material: SS201, SS304/304L and SS316/316L. Floor-standing panel thickness up to 2.5mm.Custom Interface: Dimensioned drawings for size, doors, cutouts, mounting brackets, gasket paths, grounding, and hardware; maximum bolt size M20.
Surface Finish & Quality: No.4/Scotch-Brite brushed finish, controlled weld cleanup, with agreed inspection points prior to shipment.
Design Requirements: Share target protection rating, installation environment, and operating conditions. These inputs guide material selection, structure, and sealing.
DRAWING-BASED OEM PROJECT
Stainless Steel Meter Boxes for corrosion resistance, metering protection and long-term durability
A stainless steel meter box project succeeds when material grade, protection rating, custom dimensions and finish are aligned with the installation environment from the start.
Dimensions, door configuration, cable entries and mounting style are set by the project drawing.
Review corrosion environment, visible surfaces, touch-up requirements and metering component interfaces together.
Choose SS304 for general environments or SS316 for coastal and chemical exposure after reviewing corrosion and finish requirements.
Select finish based on aesthetics, corrosion resistance and whether additional protective coatings are required.
Check IP rating test records, salt spray test results, dimensional inspection and weld quality before shipment.
Separate the mechanical enclosure from metering devices, wiring, components and electrical system certification.
Best fit
- Coastal, industrial or high-humidity environments where corrosion resistance is critical.
- Custom dimensions that exceed standard catalog sizes for specialized metering installations.
- Long service life requirements (25–50+ years) with minimal maintenance access.
- Visible architectural installations where finish quality and color matching matter.
Not the default scope
- Standard indoor meter boxes where low-cost carbon steel with paint is sufficient.
- Projects requiring immediate stock delivery without drawing confirmation.
- Assuming one material grade fits all environments without reviewing site conditions.
DESIGN INPUTS
Define the Material Grade, Protection Rating and Custom Dimensions
Material selection, IP rating, finish and dimensional accuracy must align with the installation environment from the first drawing review.
| Project variable | Decision required |
|---|---|
| Material grade | SS304/304L for general environments or SS316/316L for coastal and chemical exposure; panel thickness up to 2.5mm |
| Protection rating | IP55, IP65 or IP66 based on dust, moisture and water jet exposure at the installation site |
| Dimensions and configuration | Wall-mounted, floor-standing or junction box; custom width, height, depth and door layout per project drawing |
| Surface finish | No.4/Scotch-Brite brushed, mirror polished, or powder coated with color matching to architectural requirements |
| Cutouts and interfaces | Meter window openings, cable entries, mounting brackets, gasket paths, grounding points and lock mechanisms (max bolt M20) |
| Corrosion protection | Environment review, optional additional coatings (powder coating, galvanizing or zinc-rich primer), touch-up strategy and salt spray test requirements |
| Tolerance and inspection | Dimensional accuracy, weld quality, IP rating test records, salt spray test results and pre-shipment inspection points |
| Supply boundary | Mechanical enclosure scope separated from meters, wiring, components and electrical system certification |
Protect durability across every installation environment
SS304/304L for general use or SS316/316L for coastal and chemical exposure; panel thickness up to 2.5mm
IP55, IP65 or IP66 based on dust, moisture and water jet exposure at the installation site
Wall-mounted, floor-standing or junction box; custom width, height, depth and door layout per project drawing
No.4/Scotch-Brite brushed, mirror polished, or powder coated with color matching to architectural requirements
ENGINEERING & QUALITY
Control Material Grade, IP Rating and Custom Dimension Accuracy
One deviation in material selection or protection rating can compromise corrosion resistance, metering safety and service life across the entire installation.
Stainless steel meter box release sequence
- 01Confirm material grade and panel thickness.SS304/304L or SS316/316L selection and thickness up to 2.5mm are recorded per environment.
- 02Define protection rating and corrosion requirements.IP55/IP65/IP66 rating, salt spray test target and additional coating needs are specified.
- 03Set dimensions, door layout and cable entry configuration.Custom width, height, depth, door type and cable entry positions are checked against the project drawing.
- 04Review cutouts, mounting brackets, gasket paths and lock mechanisms.Meter window openings, grounding points, bracket positions and max M20 bolt specifications are reviewed.
- 05Freeze surface finish and first-article inspection criteria.Brushed/mirror/powder coated finish, weld quality standards and first-article checks are agreed.
- 06Control revisions, inspection records, labels and packing per unit.Unit labels, IP test records, salt spray reports, revision documents and packing are controlled per order.
Quality inspection checkpoints
Check material grade certification, panel thickness and dimensional accuracy against project drawing.
Check IP rating test results, weld penetration and surface finish. Define corrosion protection strategy and touch-up requirements before final inspection.
Confirm meter window openings, cable entry positions, gasket compression, door hinge alignment and lock mechanism function.
Record salt spray test hours, unit identification, packing list and drawing revision per shipment.
PROJECT FAQ
Send the Material, Protection Rating and Custom Dimension Inputs
Show the installation environment, corrosion requirements and dimensional specifications that drive material selection and finish.
Stainless Steel Meter Box project data and evidence status
| Field | Buyer-facing value | Status |
|---|---|---|
| Custom dimensions | Wall-mounted, floor-standing or junction box; width, height, depth and door layout set by project drawing | Project-defined |
| Material and thickness | SS304/304L for general environments or SS316/316L for coastal and chemical exposure; panel thickness up to 2.5mm as specified on drawing. | Conditional scope |
| Surface treatment | State the environment, corrosion exposure, material grade, finish type, visible surfaces, and touch-up expectations at quote stage. | Quote input |
| Fabrication route | The route follows cutout positions, cable entry layout, gasket paths and site installation method; fixed equipment specifications are not published. | Scope confirmed later |
| Joining and sealing | Define the door hinges, panel closure, gasket details, cable entry sealing method, and grounding points on the approved drawing. | Drawing decision |
| Tolerance and inspection | Dimensional accuracy, weld quality and IP rating; acceptance method must be agreed. | Acceptance input |
| Tests and files | The record should cover material certification, IP rating test, salt spray test results, and the agreed verification scope. No certification is claimed. | Conditional evidence |
| First article and batches | Freeze material grade, finish specifications and first-article inspection criteria. | Customer requirement |
| Packaging and destination | Control revisions, inspection records, labels and packing per unit. | Delivery input |
| Project photographs | No approved public stainless steel meter box customer-photo set is currently available. | Public evidence unavailable |
| Drawing examples | No anonymous stainless steel meter box drawing case has been cleared for public release. | Public evidence unavailable |
| BOM and assembly boundary | Mechanical enclosure scope separated from meters, wiring, components and electrical system certification | Must be defined |
| Inquiry description | Describe material grade, protection rating, dimensions, finish, cutouts and installation environment; verified family inquiry data has not been published. | Sales confirmation needed |
| Proven applications | Selection contexts are shown, but no approved completed-project list is public for this stainless steel meter box. | Public evidence unavailable |
Stainless Steel Meter Box buyer questions
What makes a meter box suitable for harsh environments?
Correct material grade (SS316 for coastal/chemical), appropriate IP rating (IP65/IP66), quality welds and optional additional protective coatings—not simply a stainless steel box.
Can meter box dimensions be fully customized?
Yes as a drawing-based OEM project, but material thickness, door behavior, cable entry layout and corrosion protection need review before quotation.
How is the protection rating determined?
Define the installation environment, dust exposure, moisture level, water jet risk and whether additional sealing or gaskets are required.
Can additional protective coatings be applied?
They can be quoted when the environment, coating type (powder coating, galvanizing or zinc-rich primer), color and touch-up strategy are defined.
Does FN supply complete metering systems?
The mechanical enclosure scope must be separated from meters, wiring, electrical components, testing and system certification. Do not assume a full electrical system.
What controls repeat production quality?
Use material certification, frozen dimensions, IP test records, salt spray reports, drawing revisions, inspection points and unit identification.
What must be planned for shipping and installation?
Unit dimensions, weight, door/panel condition (fitted or loose), cable entry orientation, destination environment and site handling constraints.
Are certifications included?
No current certification is claimed. Any standard, test or third-party document must be specified as a project requirement before quotation.






